Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.
PRODUCT CATEGORIES
All Products
View:
Brand: AUTO
Packaging: Standard export packaging
Supply Ability: 12000pcs/month
Min. Order: 500 Bag/Bags
Model No.: YRT150
YRT bearing has the characteristics of compact structure, thin wall thickness, light weight, good rigidity, high rotation precision, large load capacity, small starting friction torque and a large number of mounting holes, and has high radial and axial bearing capacity. It is used in high-precision indexing plates,...
Brand: AUTO
Packaging: Standard export packaging
Supply Ability: 12000pcs/month
Min. Order: 500 Bag/Bags
Model No.: YRT120
The YRT bearing consists of a thrust/central race, a thrust/central shaft collar, a thrust washer, two needle roller cage assemblies and a set of centripetal cylindrical rollers. The seat ring and collar have uniform mounting screw holes. This type of bearing has high axial and radial load carrying capacity. YRT...
Brand: AUTO
Packaging: Standard export packaging
Supply Ability: 12000pcs/month
Min. Order: 500 Bag/Bags
Model No.: YRT100
YRT bearings are a combination of high precision, low torque and long life bearings. The structure consists of an outer ring, two inner rings, two sets of cages and three rows of rollers. The race and the collar have uniform mounting screw holes. Two rows of rollers constitute a thrust bearing capable of withstanding...
High speed angular contact ball bearing(71948C/71948AC)
Brand: AUTO
Packaging: Standard export packaging
Supply Ability: 3000pcs/month
Min. Order: 500 Bag/Bags
Model No.: 71948C/71948AC
The key lies in the following points: whether the equipment can run for a long period or whether it can run correctly. First: to choose the suitable spare parts, the quality of spare parts is related to the operation cycle of the equipment, which is related to the safety of all of us. Second: the correct maintenance...
High speed angular contact ball bearing(71932C/71932AC)
Brand: AUTO
Packaging: Standard export packaging
Supply Ability: 3000pcs/month
Min. Order: 500 Bag/Bags
Model No.: 71932C/71932AC
The test of different feed and speed, when the feed rate and feed rate increases to a certain extent, bearing the external surface slope and roughness of the burn phenomenon, which does not meet the technical requirements, so the amount of feed and feed speed can not arbitrarily increase, and the combination of an...
High speed angular contact ball bearing(71944C/71944AC)
Brand: AUTO
Packaging: Standard export packaging
Supply Ability: 3000pcs/month
Min. Order: 500 Bag/Bags
Model No.: 71942C/71942AC
ngular contact ball bearings are usually used in pairs, and the size of the contact angle determines its ability to bear axial load. Therefore, for the first time to replace the bearing, we must remember its type, including contact angle, installation mode, grade and so on, which is very important for the life and...
High speed angular contact ball bearing(71940C/71940AC)
Brand: AUTO
Packaging: Standard export packaging
Supply Ability: 3000pcs/month
Min. Order: 500 Bag/Bags
Model No.: 71940C/71940AC
Angular contact ball bearings in the use of the current very much, mainly because it can withstand the axial and radial load, and pure axial load, the speed limit is very high, but to bear axial load and the size of the contact angle on the size of the larger contact angle the greater the axial load bearing. What is...
High speed angular contact ball bearing(70C/71AC)
Brand: AUTO
Packaging: Standard export packaging
Supply Ability: 3000pcs/month
Min. Order: 500 Bag/Bags
Model No.: 70C/71AC
Airframe Control Bearings are generally characterized of being relatively lightweight, corrosion resistant, grease-lubricated, and are typically sealed to ensure uncompromising performance in some extreme environments. Inner diameter range:8-220mm Brand: AUTO Series: deep groove ball bearings, single row, Tapered...
High speed angular contact ball bearing(7009C/7009AC)
Brand: AUTO
Packaging: Standard export packaging
Supply Ability: 3000pcs/month
Min. Order: 500 Bag/Bags
Model No.: 7009C/7009AC
Almost all machine tool manufacturers have faced premature failure of the screw drive bearings. The operating life is usually from a few hours to a few weeks. The striking thing is that after the bearings are replaced by the service department, they soon fail after almost the same short time. The cause of this failure...
High speed angular contact ball bearing(7015C/7015AC)
Brand: AUTO
Packaging: Standard export packaging
Supply Ability: 3000pcs/month
Min. Order: 500 Bag/Bags
Model No.: 7015C/7015AC
In a screw drive bearing, the false Bush indentation often occurs when the bearing rotation angle is very small or micro motion. Because, under this kind of movement, the oil film is difficult to form. The micro displacement is caused by the vibration in the machine's operation, or by the axis positioning. This has a...
High speed angular contact ball bearing(7011C/7011AC)
Brand: AUTO
Packaging: Standard export packaging
Supply Ability: 3000pcs/month
Min. Order: 500 Bag/Bags
Model No.: 7011C/7011AC
In the rotating bearing, "water" phenomenon occurs in the contact area is called EHD (fluid elastic contact), this phenomenon which is not terrible, this is the objective existence, need to overcome. In the operating contact of the parts, the oil film separates the relative motion between the rolling body and the...
High speed angular contact ball bearing(7012C/7012AC)
Brand: AUTO
Packaging: Standard export packaging
Supply Ability: 3000pcs/month
Min. Order: 500 Bag/Bags
Model No.: 7012C/7012AC
If at that time, there was not enough relative movement between the rotating contact elements, for example, if a small angle of rotation was carried out, the dry friction would happen when the oil film in the contact area was destroyed. In this case, contact corrosion will occur, and contact corrosion usually occurs...
High speed angular contact ball bearing(71915C/71915AC)
Brand: AUTO
Packaging: Standard export packaging
Supply Ability: 3000pcs/month
Min. Order: 500 Bag/Bags
Model No.: 71915C/71915AC
The performance of miniature precision ball bearings is critically affected by minute particle contamination. Avoiding exposing the bearing to any environment where particles may be present is highly recommended. Shields and seals are used to prevent contaminants from reaching the inside of the bearing. However, after...
Double Row Angular Contact Ball Bearing (3056220/3220YM)
Brand: AUTO
Packaging: Standard export packaging
Supply Ability: 3000pcs/month
Min. Order: 500 Bag/Bags
Model No.: 3056220/3220YM
The allowable tilt angle depends on the internal clearance of the bearing, the bearing size, the internal design and the forces and moments acting on the bearing. The maximum allowable tilt angle should be guaranteed. There is no excessive additional stress in the bearing. Double row angular contact ball bearings can...
High speed angular contact ball bearing(7016C/7016AC)
Brand: AUTO
Packaging: Standard export packaging
Supply Ability: 3000pcs/month
Min. Order: 500 Bag/Bags
Model No.: 7016C/7016AC
Ceramic bearings have never been accepted since, in theory, the basic rated load is 30% lower than the standard bearing of the same design. This is mainly due to the higher elastic coefficient of the ceramic ball. The contact area of the ceramic ball on the raceway is smaller, and the stress is greater under the same...
High speed angular contact ball bearing(718AC)
Brand: AUTO
Packaging: Standard export packaging
Supply Ability: 3000pcs/month
Min. Order: 500 Bag/Bags
Model No.: 718AC
The complete range of SKF corrosion resistant ball bearings for the food and beverage industry provides solutions that help meet increasingly stringent industry requirements while providing the capability of operating in harsh or extreme environments. Brand: AUTO Series: deep groove ball bearings, single row, Tapered...
High speed angular contact ball bearing(7008C/7008AC)
Brand: AUTO
Packaging: Standard export packaging
Supply Ability: 3000pcs/month
Min. Order: 500 Bag/Bags
Model No.: 7008C/7008AC
The breakage of the inner and outer rings is the main failure form of the bearing. Influenced by the load distribution, the inner and outer rings at both ends of the bearing are more easily broken than the middle position. The main reasons caused by the broken bearing: bearing structure parameters design is not...
High speed angular contact ball bearing(71817C/71817AC)
Brand: AUTO
Packaging: Standard export packaging
Supply Ability: 3000pcs/month
Min. Order: 500 Bag/Bags
Model No.: 71817C/71817AC
In the HR series, the rollers are increased in both size and number giving it an even higher load capacity. They are generally mounted in pairs in a manner similar to single-row angular contact ball bearings. In this case, the proper internal clearance can be obtained by adjusting the axial distance between the cones...
High speed angular contact ball bearing(719C/719AC)
Brand: AUTO
Packaging: Standard export packaging
Supply Ability: 3000pcs/month
Min. Order: 500 Bag/Bags
Model No.: 719C/719AC
Deep groove ball bearing with upgraded machined brass cageSKF offers quiet running generators. Designed especially for wind turbine generators, SKF Quiet Running deep groove ball bearings significantly reduce noise levels and structural resonance. They are less sensitive to variable operating conditions, can increase...
Angular contact ball bearing 3202
Brand: AUTO
Packaging: Standard export packaging
Supply Ability: 3000pcs/month
Min. Order: 500 Bag/Bags
Model No.: 3202
Double row angular contact ball bearing introduction and feature description Double row angular contact ball bearing Cage Double row angular contact ball bearings using stamped steel cages do not have a suffix for the cage. The use of machined brass solid cages guided by steel balls is indicated by the most M after...
High speed angular contact ball bearing(71938C/71938AC)
Brand: AUTO
Packaging: Standard export packaging
Supply Ability: 3000pcs/month
Min. Order: 500 Bag/Bags
Model No.: 71938C/71938AC
After the trial found that due to less grinding step, placing it in the fine grinding stage is not due to friction heat of the bearing ring organization influence, it will make the size of each part of the inner ring of the bearing is changed; the improved process, although due to shock grinding in grinding slope in...
Brand: AUTO
Supply Ability: 5000ps/month
Min. Order: 500 Bag/Bags
Model No.: SE9
Due to the high integration of the rotary drive, the user does not have to purchase and process each component that constitutes the rotating device one by one, which also reduces the preparation process at the beginning of the production to a certain extent, thereby greatly improving the labor productivity. The worm...
Brand: AUTO
Supply Ability: 5000ps/month
Min. Order: 500 Bag/Bags
Model No.: SE7
According to the openness of the slewing drive transmission mechanism, the slewing drive can be divided into open type and closed type. Generally, the open structure is mostly used in applications where the environment is too harsh, the maintenance and maintenance cycle is short, and the open structure is more...
Brand: AUTO
Supply Ability: 5000ps/month
Min. Order: 500 Bag/Bags
Model No.: SE5
According to the form of the variable speed transmission of the slewing drive, it can be divided into a tooth type slewing drive and a worm gear type slewing drive, inheriting the respective characteristics of the gear drive and the worm gear drive, and the two slewing drives can be adapted to medium and high speed...
Home > Products
Send Inquiry
Mr. Derrick
Email:
Send Inquiry Tel:86-0379-65188961
Fax:86-0379-65188961
Mobile Phone:+8613721655534
Email:
Address:No.1 Nan Chang Road, Luoyang, Henan
Related Products List
Mobile Site
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.
Fill in more information so that we can get in touch with you faster
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.